|
Your Peace of Mind is Our Top Priority®
|
|
|
|
|
|
|
|
How to Prime a Jet Pump |
-
Remove priming plug.
-
Prime system by filling pump and suction pipe with water.
-
Replace priming plug loosely.
-
Turn pump on and make sure pump is delivering water. If no water is pumped within 15 seconds, turn pump off and re-prime.
-
After pump is primed, tighten priming plug. |
|
Important: The pump housing and piping MUST BE MANUALLY PRIMED (filled with water) the first time, before running the motor, or damage will result that WILL VOID YOUR WARRANTY.
Note: On existing deep wells, make sure proper ejector is being used. If ejector does not match pump, the pump may not build pressure and may not prime properly. |
|
| |
|
|